HeSo schrieb:Die Zähneanzahl findest Du in der Betriebsanleitung/Ersatzteilliste.
Hallo Helmut,
da hatte ich zu kurz gedacht, als ich die Zahlen bei den technischen Daten suchte...
Du hast natürlich recht, also:
i1 = 37/20
i2H = 60/62 (wenn ich die Paarung der Kombination richtig interpretiere)
i2L = 80/42
iH = (37/20) * (60/62) = 2.64
iL = (37/20) * (80/42) = 3.52
niH = 5600/Min / 2.64 = 2121/Min
niL = 5600/Min / 3.52 = 1590/Min
Passt also, zumindest grössenordnungsmässig.
Hans