Hallo Roland,
da fällt mir ein:wenn die Buchsen eingeklebt werden sieht man doch so gut wie nichts mehr davon,ev. die Stirnseiten.Und wenn die Oberfläche nicht spiegelglatt ist müssten sie doch eigentlich fester sitzen.Oder?
Achim
alu drehen
|
|
Nachrichten in diesem Thema |
alu drehen - von roland54 - 16.06.2010, 10:36
RE: alu drehen - von Edwin - 16.06.2010, 11:37
RE: alu drehen - von kieberer0 - 16.06.2010, 12:11
RE: alu drehen - von Booze - 16.06.2010, 17:47
RE: alu drehen - von roland54 - 17.06.2010, 08:33
RE: alu drehen - von Edwin - 17.06.2010, 09:39
RE: alu drehen - von Booze - 17.06.2010, 09:54
RE: alu drehen - von walter - 17.06.2010, 09:57
RE: alu drehen - von roland54 - 17.06.2010, 10:23
RE: alu drehen - von Edwin - 17.06.2010, 10:39
RE: alu drehen - von roland54 - 17.06.2010, 11:03
RE: alu drehen - von Allemool - 17.06.2010, 11:08
RE: alu drehen - von roland54 - 17.06.2010, 12:05
RE: alu drehen - von Schwobaseggl - 17.06.2010, 12:41
RE: alu drehen - von roland54 - 17.06.2010, 12:58
RE: alu drehen - von murxxer - 18.06.2010, 10:11
RE: alu drehen - von roland54 - 18.06.2010, 10:51
RE: alu drehen - von Schwobaseggl - 18.06.2010, 09:16
RE: alu drehen - von roland54 - 18.06.2010, 10:32
RE: alu drehen - von oldradio - 18.06.2010, 09:47
RE: alu drehen - von Gary - 18.06.2010, 16:32
RE: alu drehen - von Booze - 18.06.2010, 19:09
RE: alu drehen - von Bihi - 18.06.2010, 19:22
RE: alu drehen - von Lumpi - 18.06.2010, 23:36
RE: alu drehen - von murxxer - 19.06.2010, 09:29
RE: alu drehen - von roland54 - 19.06.2010, 11:26
RE: alu drehen - von Lumpi - 19.06.2010, 18:21
RE: alu drehen - von Balu - 19.06.2010, 11:59
RE: alu drehen - von roland54 - 19.06.2010, 12:54
RE: alu drehen - von roland54 - 19.06.2010, 18:54
RE: alu drehen - von Basti2290 - 19.06.2010, 21:05
|
Benutzer, die gerade dieses Thema anschauen: 11 Gast/Gäste