(31.10.2010, 22:51)alexander_d schrieb: Sind Einschnitt-Gewindebohrer grundsätzlich nicht für Stahl geeignet?
Hallo,
darüber kann ich nur müde lächeln:
M10 EMUGE HSSE-TiALN-T10 auf Säulenbohrmaschine:
M8 EMUGE HSSE-PM auf Drehmaschine:
Schau mal hier: Verkaufe Maschinengewindebohrer EMUGE M8, M10 und BASS M12x1.5
Aber in Zeiten, da Gewindeschneidsätze vom ALDI/HOFER für 5,- € angeboten und gekauft werden...
Für ordentlich muss man halt auch ordentlich Geld hinblättern...